# Episode 2 Pre-Update Installation Instructions

**URL:** <https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248>\
**Category:** HL2 Episode Two\
**Created:** [September 15, 2013, 2:46pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248 "2013-09-15T14:46:53Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![execut4ble](https://b-cdn.sourceruns.org/user_avatar/forums.sourceruns.org/execut4ble/32/14_2.png) [@execut4ble](https://forums.sourceruns.org/u/execut4ble)\
**Post date:** [September 15, 2013, 2:46pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/1 "2013-09-15T14:46:53Z")

</div>

These are the instructions on installing the fixed preupdate.

Get the preupdate here - [https://www.dropbox.com/s/tzvff43cwkm8aze/preupdate.7z](https://www.dropbox.com/s/tzvff43cwkm8aze/preupdate.7z)

Check if you have Episode Two and Episode One GFC’s in your Steamapps folder.  
If you don’t, get them here -

[https://mega.co.nz/#!oUtgRK6T!cSpmpgF6ZS1CQLrAQlkjgUFJ3JBdSFEuHa595yD\_cqA](https://mega.co.nz/#!oUtgRK6T!cSpmpgF6ZS1CQLrAQlkjgUFJ3JBdSFEuHa595yD_cqA)

> [@Episode 2 Pre-Update Installation Instructions](https://forums.sourceruns.org/t/fixed-pre-update-installation-instructions/2248/44):
>
> A lot of people have had issues using the GCFs linked in the thread, they might be corrupted or something. Maxx made an unpack which you can also use with Steam open so I recommend using it instead. Link: [https://mega.co.nz/#!8BcGmbhC!BRc\_VWlrbiV916VCmCB3tCJPEAbQBY-EcBZlDmSiVeI](https://mega.co.nz/#!8BcGmbhC!BRc_VWlrbiV916VCmCB3tCJPEAbQBY-EcBZlDmSiVeI)

> [@Episode 2 Pre-Update Installation Instructions](https://forums.sourceruns.org/t/fixed-pre-update-installation-instructions/2248/8):
>
> Here is a short guide on how to install this preupdate thing for S. and Elgu: Download “[preupdate.7z](https://dl.dropbox.com/u/6051581/preupdate.7z)” and “[Episode 1 & 2 GCFs.zip](https://mega.co.nz/#!oUtgRK6T!cSpmpgF6ZS1CQLrAQlkjgUFJ3JBdSFEuHa595yD_cqA).” Extract “preupdate.7z” into a folder named “ep2”, this folder can be placed anywhere.[image] Extract “Episode 1 & 2 GCFs.zip” to a folder that will have a path with no spaces. Make note of the path.[image] Open “rev.ini” in your “ep2” folder and edit the line “CachePath” to match that of the one noted earlier (where all the GCF’s are) and save.[image] COMPLETE…

Good luck and have fun!

---

<div class="post-metadata">

**Author:** ![S11](https://b-cdn.sourceruns.org/letter_avatar_proxy/v4/letter/s/d9b06d/32.png) [@S11](https://forums.sourceruns.org/u/S11)\
**Post date:** [September 27, 2013, 10:04pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/2 "2013-09-27T22:04:47Z")

</div>

Ok so this doesn’t work for shit so I’m gonna ask it like this;

I have a completely fresh install of Steam. No games installed. Steamapps is empty.

What is my EVERY SINGLE STEP I do to get this shit working?  
And by EVERY SINGLE STEP I mean EVERY SINGLE STEP. Even if it may seem trivial.

---

<div class="post-metadata">

**Author:** ![Elgu](https://b-cdn.sourceruns.org/letter_avatar_proxy/v4/letter/e/b5a626/32.png) [@Elgu](https://forums.sourceruns.org/u/Elgu)\
**Post date:** [September 27, 2013, 11:13pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/3 "2013-09-27T23:13:55Z")

</div>

> Ok so this doesn't work for shit

This. I have no idea what am I doing. Had to re-install HL2 and EP2

---

<div class="post-metadata">

**Author:** ![Maxx](https://b-cdn.sourceruns.org/letter_avatar_proxy/v4/letter/m/5fc32e/32.png) [@Maxx](https://forums.sourceruns.org/u/Maxx)\
**Post date:** [September 29, 2013, 10:09pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/4 "2013-09-29T22:09:25Z")

</div>

Are the GCF’s and the files in preupdate.7z from RIGHT before the steampipe conversion (ie 5135) or is it an older engine.

---

<div class="post-metadata">

**Author:** ![\_MD](https://b-cdn.sourceruns.org/letter_avatar_proxy/v4/letter/_/a698b9/32.png) [@\_MD](https://forums.sourceruns.org/u/_MD)\
**Post date:** [September 29, 2013, 10:19pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/5 "2013-09-29T22:19:30Z")

</div>

S., If you are in really trouble with that I could to do a remote acces and try to get it working for you… I don’t know why it isn’t working if you did every single step but… Maybe it works.

You don’t have to put the preupdate folder on the steam folder. I’m using my preupdate on desktop. You can try to do that and see if it works.

---

<div class="post-metadata">

**Author:** ![Maxx](https://b-cdn.sourceruns.org/letter_avatar_proxy/v4/letter/m/5fc32e/32.png) [@Maxx](https://forums.sourceruns.org/u/Maxx)\
**Post date:** [September 30, 2013, 1:36am UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/6 "2013-09-30T01:36:40Z")

</div>

Anyone else have this model in t-form during Our Mutual Fiend? [http://puu.sh/4DKxS.png](http://puu.sh/4DKxS.png)

Tried replacing it MULTIPLE times with the ones given in the 7z file but it wont work, any way to refresh model cache?

---

<div class="post-metadata">

**Author:** ![Elgu](https://b-cdn.sourceruns.org/letter_avatar_proxy/v4/letter/e/b5a626/32.png) [@Elgu](https://forums.sourceruns.org/u/Elgu)\
**Post date:** [September 30, 2013, 8:58pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/7 "2013-09-30T20:58:12Z")

</div>

I’m getting “Can’t find background image ‘materials/console/ep1\_backgroundxx\_widescreen.vtf’”. And I dont have any console folder(s) in my steam nor my preupdate folder. Any Ideas? ???

---

<div class="post-metadata">

**Author:** ![Maxx](https://b-cdn.sourceruns.org/letter_avatar_proxy/v4/letter/m/5fc32e/32.png) [@Maxx](https://forums.sourceruns.org/u/Maxx)\
**Post date:** [October 1, 2013, 12:02am UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/8 "2013-10-01T00:02:11Z")

</div>

Here is a short guide on how to install this preupdate thing for S. and Elgu:

- Download “[preupdate.7z](https://dl.dropbox.com/u/6051581/preupdate.7z)” and “[Episode 1 & 2 GCFs.zip](https://mega.co.nz/#!oUtgRK6T!cSpmpgF6ZS1CQLrAQlkjgUFJ3JBdSFEuHa595yD_cqA).”
- Extract “preupdate.7z” into a folder named “ep2”, this folder can be placed anywhere. ![](http://puu.sh/4Eukz.png)
- Extract “Episode 1 & 2 GCFs.zip” to a folder that will have a path with no spaces. Make note of the path. ![](http://puu.sh/4Euvd.png)
- Open “rev.ini” in your “ep2” folder and edit the line “CachePath” to match that of the one noted earlier (where all the GCF’s are) and save. ![](http://puu.sh/4EuF6.png)
- **_COMPLETELY EXIT STEAM_** , I mean go into task manager and make sure “Steam.exe” and “GameOverlayUI.exe” are NOT PRESENT. If even one of those EXE’s are running then you will get an error relating to a material for console and the game will fail to load!!
- Simply double click “ep2.bat” and the game will launch (give it a minute or two for the first launch).

If you have any more questions please PM or add me on Steam, I hope this helped and I cant wait to see HL2:EP2 RUDAHD&WLEw/WLEUU soon!

---

<div class="post-metadata">

**Author:** ![S11](https://b-cdn.sourceruns.org/letter_avatar_proxy/v4/letter/s/d9b06d/32.png) [@S11](https://forums.sourceruns.org/u/S11)\
**Post date:** [October 5, 2013, 2:58pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/9 "2013-10-05T14:58:29Z")

</div>

1. I downloaded “preupdate.7z” and “Episode 1 & 2 GCFs.zip”
2. I extracted “preupdate.7z” into a folder named “ep2”, which has been placed anywhere.  
 ![](https://photos-3.dropbox.com/t/0/AADc2suyb6t4GRVeEzYf3ED_718iQeI_5UoTCyxraW30Kw/12/15635035/png/1024x768/3/1380988800/0/2/1.png/WFm70-I-TAF_Aqq15pFyE-UaJKzhmToja39rbwiMs3E)
3. I extracted “Episode 1 & 2 GCFs.zip” to a folder that does has a path with no spaces. I made note of the path.  
 ![](https://photos-1.dropbox.com/t/0/AACAw-GtloZOfo5bEkfwtRUAsLpkaH6C7oshGN_R1gFPzw/12/15635035/png/1024x768/3/1380988800/0/2/2.png/OUu1qNRkfJK3B6i1jSAeymOSmhbBBk5dm94a4sCEEqc)
4. I opened “rev.ini” in my “ep2” folder and edited the line “CachePath” to match that of the one noted earlier (where all the GCF’s are) and saved.  
 ![](https://photos-6.dropbox.com/t/0/AAC9PzsVMn66cIzjxF4aexMXGqu3bHEfbP7nN-rcw62qYQ/12/15635035/png/1024x768/3/1380988800/0/2/3.png/yv8CIW6WclcnBNDn9BtjqJurEWrsHST4xjbw-qE5h6s)
5. _ **I COMPLETELY EXITED STEAM** _, I mean went into task manager and made sure “Steam.exe” and “GameOverlayUI.exe” are NOT PRESENT.  
 ![](https://photos-4.dropbox.com/t/0/AAAz1SlJ10WPaSJhig6lr7FGnyu218wb9YbM6qxWpABSqg/12/15635035/png/1024x768/3/1380988800/0/2/4.png/XACIUZzC5Fwso5MWFGHy7dpRDYqlJjS9DD9DhZw3oy4)
6. I simply double clicked “ep2.bat” but the game won’t launch.  
 ![](https://photos-5.dropbox.com/t/0/AAAxK2_qy6WynfGv1tzGYrWVck2JCdFAglxHMM0yMkjBPg/12/15635035/png/2048x1536/3/1380988800/0/2/5.png/Yu8_AQZpv-fVd1RZazbfEUroqQYXQI1pNunRqZGU1PA)

---

<div class="post-metadata">

**Author:** ![D4rw1N](https://b-cdn.sourceruns.org/user_avatar/forums.sourceruns.org/d4rw1n/32/15_2.png) [@D4rw1N](https://forums.sourceruns.org/u/D4rw1N)\
**Post date:** [October 5, 2013, 5:03pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/10 "2013-10-05T17:03:43Z")

</div>

This is pretty much exactly the same problem I had with the pre-update about 2-3 years ago… Hope it gets a real, permanent, fix shortly!

Oh and no, I haven’t tried this “fixed” one yet so it might just work this time.

---

<div class="post-metadata">

**Author:** ![Maxx](https://b-cdn.sourceruns.org/letter_avatar_proxy/v4/letter/m/5fc32e/32.png) [@Maxx](https://forums.sourceruns.org/u/Maxx)\
**Post date:** [October 5, 2013, 5:56pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/11 "2013-10-05T17:56:29Z")

</div>

I cant load your images S. ☹

---

<div class="post-metadata">

**Author:** ![Maxx](https://b-cdn.sourceruns.org/letter_avatar_proxy/v4/letter/m/5fc32e/32.png) [@Maxx](https://forums.sourceruns.org/u/Maxx)\
**Post date:** [October 5, 2013, 6:11pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/12 "2013-10-05T18:11:26Z")

</div>

OK! So it looks like all the problems people are having is due to the fact that almost all GCF’s in the mega link are incomplete. Im uploading the working ones but it will take a REALLY long time, if you are interested in getting the GCF’s via Steam servers go ahead and download CFToolBox, you will need to input your steam username, password, and steamguard hash, until then wait about 3-6hrs and we’ll be up and running :D!

---

<div class="post-metadata">

**Author:** ![Maxx](https://b-cdn.sourceruns.org/letter_avatar_proxy/v4/letter/m/5fc32e/32.png) [@Maxx](https://forums.sourceruns.org/u/Maxx)\
**Post date:** [October 5, 2013, 8:30pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/13 "2013-10-05T20:30:54Z")

</div>

So Mega sucks at uploading, after getting about 40% of the way there it resets back to 1% almost every time… Anyone have a ftp? better file hosting service?

---

<div class="post-metadata">

**Author:** ![Cameron\_D](https://b-cdn.sourceruns.org/user_avatar/forums.sourceruns.org/cameron_d/32/251_2.png) [@Cameron\_D](https://forums.sourceruns.org/u/Cameron_D)\
**Post date:** [October 6, 2013, 11:56am UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/14 "2013-10-06T11:56:32Z")

</div>

Can always make a torrent of them, or throw them up on [archive.org](http://archive.org), but they may be taken down from there.

---

<div class="post-metadata">

**Author:** ![Elgu](https://b-cdn.sourceruns.org/letter_avatar_proxy/v4/letter/e/b5a626/32.png) [@Elgu](https://forums.sourceruns.org/u/Elgu)\
**Post date:** [October 6, 2013, 12:10pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/15 "2013-10-06T12:10:26Z")

</div>

I actually got the missing GCFs uploaded to mega. [https://mega.co.nz/#!Kh4ySCiS!cO8JU2\_PLkl0k9BpsutMoAM9EMkU8L8DQNOBxcf\_bE8](https://mega.co.nz/#!Kh4ySCiS!cO8JU2_PLkl0k9BpsutMoAM9EMkU8L8DQNOBxcf_bE8)  
Just extract it to the folder where you have your other GCFs you downloaded from the mainpost.  
Have fun!

---

<div class="post-metadata">

**Author:** ![Cameron\_D](https://b-cdn.sourceruns.org/user_avatar/forums.sourceruns.org/cameron_d/32/251_2.png) [@Cameron\_D](https://forums.sourceruns.org/u/Cameron_D)\
**Post date:** [October 6, 2013, 12:57pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/16 "2013-10-06T12:57:44Z")

</div>

Neato burrito

---

<div class="post-metadata">

**Author:** ![execut4ble](https://b-cdn.sourceruns.org/user_avatar/forums.sourceruns.org/execut4ble/32/14_2.png) [@execut4ble](https://forums.sourceruns.org/u/execut4ble)\
**Post date:** [October 6, 2013, 3:00pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/17 "2013-10-06T15:00:06Z")

</div>

Added the missing GCFs link and Maxx’s guide into the first post.

---

<div class="post-metadata">

**Author:** ![Maxx](https://b-cdn.sourceruns.org/letter_avatar_proxy/v4/letter/m/5fc32e/32.png) [@Maxx](https://forums.sourceruns.org/u/Maxx)\
**Post date:** [October 6, 2013, 6:52pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/18 "2013-10-06T18:52:29Z")

</div>

Here is a rar with all the GCF’s listed in revApps.ini (the ones required to run the game.): [http://dl.dwahmov.tv/Episode2RequiredGCFs.rar](http://dl.dwahmov.tv/Episode2RequiredGCFs.rar)

---

<div class="post-metadata">

**Author:** ![Elgu](https://b-cdn.sourceruns.org/letter_avatar_proxy/v4/letter/e/b5a626/32.png) [@Elgu](https://forums.sourceruns.org/u/Elgu)\
**Post date:** [October 6, 2013, 11:07pm UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/19 "2013-10-06T23:07:30Z")

</div>

Anyone know if i can get EP2 mods working on this preupdate? I so how?

---

<div class="post-metadata">

**Author:** ![Cameron\_D](https://b-cdn.sourceruns.org/user_avatar/forums.sourceruns.org/cameron_d/32/251_2.png) [@Cameron\_D](https://forums.sourceruns.org/u/Cameron_D)\
**Post date:** [October 7, 2013, 12:28am UTC](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248/20 "2013-10-07T00:28:38Z")

</div>

You can, you probably just need to put the mod folder in the same place as the game content folder (so in the case of the OP, it would be F:\Source Unpack\ep2\modnamefolder) and change the launch options: make a copy of the .bat file and instead of `-game ep2` (or whatever it is) make it `-game modnamefolder`

[Next page](https://forums.sourceruns.org/t/episode-2-pre-update-installation-instructions/2248.md?page=2)
